This page will guide you through to set up our Smart DNS service, MyTelly on an iPhone smartphone running on iOS11.
Note: If you are on an older version of iOS i.e 10, please click here.
Step 1: Getting Started
Login to our website, www.simpletelly.com from your iOS device browser.
Take note of the fastest DNS server address that appears on screen.
Step 2: SimpleTelly Configuration on iOS
Choose Settings from Main Screen.
Tap on "Wi-Fi". Find your Wireless connection which has the tick or checked mark and click on the blue 'i' icon.
You should now be in your Wi-Fi details page. At the Configure DNS section, tap on Automatic.
At the DNS configuration screen, tap on Manual and tap on the red (-) minus icon to remove your existing DNS address.
Now, tap on the (+) Add Server and enter the new DNS servers that appeared on your browser earlier. Once you're done, tap on Save at top right corner to save the DNS settings.
Once you've saved the DNS information, tap on the Wi-Fi button at the top left corner to save the settings and go back to the Home screen.
Step 3: SimpleTelly IP registration on Network
Go back to your account page from your device and click on Check My Setup
If this is the first time you are setting up the service from this location, you will probably need to register your current IP address. Click on Register your new IP address.
You will get Everything's OK! message on your screen if your IP has been registered successfully in our system.
Now that you have setup and registered your system you can go ahead and access the TV site of your choice and stream it like you mean it!.
For the full list of supported channels, please refer to our Supported Services page.
Unfortunately it doesn't always go to plan! If you are having problems please email us at firstname.lastname@example.org and we will do our best to assist you.